part number 856929 140 mhz saw filter data sheet subject to change or ob solescence without notice rev a 07/10 triquint semiconductor, inc. page 1 of 5 features for base stations applications usable 1.0 db bandwidth of 18.4 mhz low loss high attenuation single - ended operation, 50 small package ceramic surface mount package (smp) hermetic rohs compliant (2002/95/ec), pb - free package pin configur ation surface mount 7.00 x 5.50 x 1.24 mm smp - 28c bottom view pin no. description 4 output 9 input 5,10 to be grounded 1,2,3 case ground 6,7,8 case ground dimensions shown are nominal in millimeters all toler ances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m, over a 2 - 6 m ni plating pb 5.50 0.60 1.24 nom. 1.35 max. 1.40 2.54 1.00 7.00 1.27 0.69 9 10 7 8 6 4 5 1 2 3
part number 856929 140 mhz saw filter data sheet subject to change or ob solescence without notice rev a 07/10 triquint semiconductor, inc. page 2 of 5 electrical specifications (1) operating temperature range: (2) - 30 to +80 o c parameter (3) minimum typical maximum unit center frequency - 140 - mhz insertion loss @ 140 mhz (fo) - 9.1 10.25 db 1.0 db bandwidth - 19.9 - mhz lower 1.0 db bandedge ( 4) - 129. 9 130.8 mhz upper 1.0 db bandedge ( 4) 149.2 150. 2 - mhz 3.0 db bandwi dth - 21 - mhz lower 3.0 db bandedge ( 4) - 129. 4 130. 5 mhz upper 3.0 db bandedge ( 4) 149. 5 150. 4 - mhz 3 0 db bandwidth (4) - 24. 3 - mhz lower 3 0 db bandedge 126.8 128. 2 - mhz upper 3 0 db bandedge - 152. 5 153.2 mhz amplitude ripple ( 5) over the 1 db bandwidth - 0. 3 5 0.8 db p - p group delay ripple 130.8 - 149.2 mhz - 47 85 n s p - p absolute delay - 0.66 - sec relative attenuation (4) 10 - 90 mhz 90 - 120 mhz 120 - 122.5 mhz 122.5 - 126.8 mhz 153.2 - 157.5 mhz 1 57.5 - 160 mhz 160 - 190.00 mhz 190 - 800 mhz 4 5 40 35 3 0 30 35 40 45 64 47 44 3 8 36 46 48 52 - - - - - - - - db db db db db db db db input vswr ( 5) 130.8 - 149.2 mhz - 1.5 2. 0 - output vswr ( 5) 130.8 - 149.2 mhz - 1. 4 2. 0 - source/load impedance (6) - 50 - ? notes : 1. all target specifications are based on triquint test circuit shown below 2. in production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. e lectrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tole rances 4. relative to insertion loss at center frequency 5. describes the maximum peak to adjacent valley variation over the passband (no t including roll - off) 6. this is the optimum impedance in order to achieve the performance shown test circuit: actual matching values may vary due to pcb layout and parasitics 50 single - ended input 50 single - ended output 1,2,3,5 6,7,8,10 50 150nh 9 4 22nh 50
part number 856929 140 mhz saw filter data sheet subject to change or ob solescence without notice rev a 07/10 triquint semiconductor, inc. page 3 of 5 typical performance (at +25 o c)
part number 856929 140 mhz saw filter data sheet subject to change or ob solescence without notice rev a 07/10 triquint semiconductor, inc. page 4 of 5 matching schematics actual matching values may vary due to pcb layout and parasitics 50 single - ended input 50 single - ended output marking pcb footprint th e date code consists of: day of the current year (julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel dimensions shown ar e nominal in millimeters packaging quantity: 3 000 units/reel 1,2,3,5 6,7,8,10 50 150nh 9 4 22nh 50 date code triquint 856929 pad 1 id dot jjjyhh 0.80 1.60 5.70 1.27 1.20 2.54 7.20 id dot 2.0 ? 13.0 ? 20.2 ? 330 16.8 2.7 direction of travel ?102 section a-a 0.3 2.2 7.3 5.8 ? 1.5 8.0 4.0 2.0 a a ? 1.5 16.0 7.5 1.75
part number 856929 140 mhz saw filter data sheet subject to change or ob solescence without notice rev a 07/10 triquint semiconductor, inc. page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t - 30 +80 o c storage temperature range t stg - 40 +85 o c input power p in - +10 dbm important notes wa rnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jedec j - std - 020c pb - free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s - parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liab ility for applications, processes, circuits or assemblies, which are implemented using any triquint component described in this dat a sheet. contact information phone: +1 (407) 886 - 8860 fax: +1 (407) 886 - 7061 email: info - product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors po box 609501 orlando, fl 32860 - 9501 usa pb
|
